Getting Ready for the SAL-30

After coming home Friday to find a box of antenna parts from Array Solutions on my front porch, the heavens opened up, and rained out any antenna construction plans I may have had. The good news is that I’ll be ready to go on Saturday, armed with everything I’ll need to get the new and improved SAL-30 up in the air by sunset.*

500 foot spool of 12 gauge wire: CHECK! The standard kit comes with 24 gauge, but I used 12 gauge when I put it up originally, so I’m sticking with it. unlike the loops on the SAL-20, which were constructed with 65 feet of wire each, the SAL-30 will be using a whopping 95 feet for each loop. That’s a lot of wire!

Replacement mast poles: CHECK! Since the SAL series of antennas requires a fiberglass mast, and will not work with aluminum, I bought replacements for the ones Fido destroyed. I should have an extra section when I’m done.

Guy rope and tensioners: CHECK! The SAL-30 kit came with enough guy rope for two levels of guys for the mast, as well as enough to support the loops itself. they also included eight tensioners, which is handy as well. Let’s hope I don’t screw up with the cuts.

New support stakes: CHECK! I decided to beef up the stakes I was using with more heavy duty supports.

Cable ties: CHECK! Cable ties are the duct tape of amateur radio. They’ll come in handy during the initial construction phase.

Heatshrink tubing, and insulators: CHECK! Heatshrink tubing is a Godsend to HAMs, almost as useful as cable ties for antenna projects. I actually have dogbone insulators for this job, although the makeshift PVC pipe sections I used for the SAL-20 worked just fine.

Soldering gun and solder: CHECK! Actually, I better double check this when I get home. i might need to get another tip for the Weller.

Nice weather: CHECK? If the forecasters are to be believed, we are supposed to be in the seventies this Saturday, with a 40% chance of afternoon thunderstorms. I’m not crazy about the 19 mph wind, but well, welcome to Iowa.

IMG_20160417_110059676
Dude, you go ahead and get the antenna up. I’ll stay here and guard the couch. could you hand me the TV remote before you go please?

So the stage is set, and I am very anxious to see if this new antenna can hear. If I don’t screw anything up, and the thunderstorms stay away until Saturday night, I should be ready to put this new antenna through its paces early next week.

Now if my helper was as enthused about this project as I am.

*I say this knowing full well that it is not true. As with all of my projects, I am certain there will be at least one trip to the hardware store for things I didn’t anticipate, I just don’t know what those things are yet. It would also be a good idea to mow the lawn before getting this beast up, as it will make my life easier in the long run. Hopefully I can get that done before Saturday.

Radio Silence

Testing, testing. Is this thing on?

In retrospect,¬†maybe it wasn’t my best decision to start airing commercials for HF Radio Review on The Mighty KBC the same week I tried to switch to a new web hosting company. In fact it was a terrible idea, but it just sort of happened that way anyways. I should know very well that these things are never quick and painless, but it would be different with my own website right? Right?? Wrong!

The good news is that, after a lot of hard work, HF Radio Review is back up, and open for business once again.

Now if I could only say the same for my SAL-20.

About two weeks ago, the unthinkable happened when my neighbor’s dog (who would make a fine rug by the way) took off after a squirrel and brought down the SAL-20 antenna. While that is annoying in itself, he also managed to crack several sections of mast AND ripped one of the loops completely out of the guy ring. This wasn’t going to be a simple put it back up kind of operation, this was going to need a complete rebuild.

And since I was going to have to rebuild it, I decided to take this opportunity to upgrade it as well. Ten days after making the call to Array Solutions, the Big Brown Truck delivered all of the parts I will need to rebuild the SAL-20 as its big brother, the SAL-30. I was very eager to get this beast up and running this weekend, but the weatherman has other ideas, as we can expect a soaking rain to move in tonight and stay all weekend. Should I have expected anything different? Expect a blog about hilarity that is sure to ensue.

By the way, if you have the recources, I’d like to encourage you to give what you can to the Mighty KBC. Dave Mason and Uncle Eric Van Willegen are truly trying to keep music on shortwave alive, and I hope you’ll help them in the fight. Every Euro counts, so please, give what you can to keep the farts blasting into the stratosphere.

It’s good to be back.